Entry roof in smaller model...what is needed?

[KnockOnWood]

We made it a bit more advanced when we switched from a pallet to a real entrance step.
It's nice to have somewhere to place the bags when opening the door,
and sometimes you can leave the muddy outdoor shoes outside:

 

[Peldah]

Absolutely, have it on the computer. Will upload during the day. What worked to my advantage when I set it up was that behind the brick facade there was a metal frame on the wooden panel behind. From the metal frame, a few bolts went through the brick, so I drilled holes in the wooden frame on the entrance roof and screwed on washers and nuts. Then I complemented with 4-5 really long and sturdy screws.

Absolutely, have it on the computer. Will upload during the day. What worked to my advantage when I set it up was that behind the brick facade there was a metal frame on the wooden panel behind. From the metal frame, a few bolts went through the brick, so I drilled holes in the wooden frame on the entrance roof and screwed on washers and nuts. Then I complemented with 4-5 really long and sturdy screws.

hi, that looks really good.
I am also interested if you had a few more pictures. Here thought exactly the same but just a larger area, and complement with supports a bit out.
Best regards, Pelle

 

[sole_oggi]

hi, that looks really good.
I am also interested if you have some more pictures. I thought the same but just a larger area, and complement with supports a bit out.
M

hi, that looks really good.
I am also interested if you have some more pictures. I thought the same but just a larger area, and complement with supports a bit out.
Regards, Pelle

Send me an email at svante_flood@hotmail.com so I don’t forget to look for the pictures. I have them on my computer.

 

[Semiproffset]

I also want to build something similar. It would be fun if you uploaded the pictures. =)