Hello everyone,
This is my first post on this forum.
I am searching high and low for a pre-painted (white) board that is 225 mm wide and at least 2500 mm long, which will be used as cladding at the end of a wall.
I wonder if anyone has any idea where I can get one or if anyone has a good tip/idea on how to solve my problem with the cladding I am working on. I need the 45 studs as there will be electrical wiring in the channel that forms.
I am attaching a picture of how I have envisioned it.
Why a pre-painted one? Buy an MDF board and cut it to the right dimensions, paint it, and put it up! I would probably choose a laminated board since the corners become quite exposed.
It's really not a problem to buy an MDF board and cut it yourself. But it's a whole lot of running when you live on the 4th floor without an elevator. Also, I'm allergic to brush strokes or roller marks that easily occur. I also considered using klackfoder, but those available are only 56 mm wide and I need at least 61 mm.
