Electrical conduit in sparse

[yens]

I will insulate with 170mm between the rafters (sloped roof), put plastic on that and then a crossing 45mm, insulation there, then battens and plasterboard on that. Some electrical conduits will need to pass by and my question is whether I can place the conduits along the battens, as there is some space there and you avoid cutting into the insulation, or should I place the conduits in the 45mm instead?

A follow-up question is which direction I should install the plasterboards if the battens are vertical (rafters vertical, horizontal 45mm, vertical battens). With cc30, there will be a lot to screw into regardless of how you install the plasterboards.

Thanks in advance!

 

[Wodie]

Normally, in the ceiling, you just put plastic, then strapping directly, and run the pipes between the strapping and the plastic.

 

[hydromatics]

if you have glesen "Stående" then you should have the plasterboards standing, otherwise there's a risk you miss every other screw