7,357 views ·
71 replies
7k views
71 replies
Construction abroad
A bit more homely, and since I can do almost all the construction myself, it becomes significantly cheaper.T Thomas_Blekinge said:
You are also allowed to build wooden structures on agricultural land without applying for a building permit. It is very difficult to obtain a building permit on agricultural land here.
So, the next issue has arisen for me here with the construction. Maybe you can come up with suggestions.
Instead of plywood, they delivered 3mm MDF and they don't want to understand the difference and refuse to take the material back. Is there any way to use the MDF as a wind barrier before the facade? Otherwise, my options are ground cloth or something called jumbomousse on a roll. That is, low-density polyethylene with closed cells.
Instead of plywood, they delivered 3mm MDF and they don't want to understand the difference and refuse to take the material back. Is there any way to use the MDF as a wind barrier before the facade? Otherwise, my options are ground cloth or something called jumbomousse on a roll. That is, low-density polyethylene with closed cells.
Member
· Blekinge
· 12 222 posts
Is 3 mm MDF even available? It must be fragile as hell.
What do you mean by a healthy house for 2 years? Is it supposed to rot afterwards?
I still don't get why you're building with wood. You say you can do almost everything yourself that way, but now you have builders anyway.
What do you mean by a healthy house for 2 years? Is it supposed to rot afterwards?
I still don't get why you're building with wood. You say you can do almost everything yourself that way, but now you have builders anyway.
Member
· Blekinge
· 10 117 posts
If the MDF is located behind a wooden panel, there should not be a problem using it. It probably has approximately the same properties as masonite. Avoid diffusion-tight materials.
I don't have builders here. There are builders here who perform certain types of wood constructions who stop by occasionally and discuss with me.T Thomas_Blekinge said:
Click here to reply
