Wood board to have in the ground.

[Draven]

I have built a friggebod on cast concrete pillars with cc1200mm spacing. On the front side, I plan to fill up with gravel and thought of placing a board against the front pillars so that the gravel doesn't go under the whole friggebod. Would form plywood work, or do you have any tips on how I can fill up the front with gravel about 40 cm?

 

[Stolsben]

If suitable, choose lecablock in an appropriate size. Anchored in the ground if it needs support with 8mm rebar.

Otherwise, pressure-treated wood, NTR A.

 

[Draven]

I intend to build with leka on both sides of the gables. But then avoid doing it against the plinths, around 10 meters. A board should work as there is free airflow under the outdoor storage shed on the back side of the board and gravel against the board on the other side.

 

[mexitegel]

Well, it will rot over time. Choose NTR-A treated wood as suggested earlier.

 

[Draven]

Ok, thank you for this.

 

[Stensson11]

A minerit board or similar.

 

[Draven]

A minerit board or similar.

Yes, that might be the best option, and above all the least amount of work.