Which door closer?

[Mikael_Swe]

Which door closer should I buy for my door entrance? Tired of it flying open all the time.

 

[Demmpa]

How much do the doors/gates need to open?

Should the door closer be installed on the inside or outside?
Should the main part be mounted on the door frame/wall or on the door leaf?

If the door closer is installed on the inside (strike side), the maximum opening angle is usually 120-130°.
If the door closer is installed on the outside (hinge side), there are door closers that can handle around 180°.

 

[Mikael_Swe]

How much do the doors need to be able to open?

Should the door closer be mounted on the inside or outside?
Should the main part be mounted on the door frame/wall or on the door leaf?

If the door closer is installed on the inside (hinge side), the maximum opening angle is usually 120-130°.
If the door closer is installed on the outside (opposite hinge side), there are door closers capable of around 180°.

Doesn't matter which side. Doesn't matter frame or wall. Only needs to be mounted on the door that stays open.

 

[Demmpa]

Think of additional factors to consider before purchasing door closers. Should there be any closing delay?

Any of these should work:
https://www.assaabloyopeningsolutio...rstangare/dorrstangare-med-standardarm/dc300/
https://www.assaabloyopeningsolutio...re-med-standardarm/dc310-med-tidsfordrojning/
https://www.dormakaba.com/se-sv/produkter/produkter/doerrbeslagning/doerrstaengare/ts-83-238106

 

[Steffe80]

Hello! I'm hijacking this thread a bit.
Does anyone know how to adjust this door closer? I would like it to press more against the door frame; as it is now, it has a gap of about one to one and a half centimeters when the door is closed.
When I search for Doorman or the numbers, it doesn't show up.
Thanks for the help.
Best regards, Stefan

 

[Demmpa]

By simply looking at the pictures, I immediately see two options.
- Detach the inner arm from the door closer and move it a notch inward into the room, possibly requiring the outer arm to be extended.
- Shorten the outer arm.

 

[Steffe80]

By just looking at the pictures, I immediately see two options.
- Loosen the inner arm from the door closer and move it one notch inward towards the room, the outer arm may need to be extended.
- Shorten the outer arm.

Okay, I'll try that, but it feels like a very cumbersome solution for fine adjustments 🤔