Where to find thin panel type 17x95

[fabbe72]

Hello everyone,

I'm planning to build a tight gate for a fence/hedge in two leaves, each 1000x1800.

It's intended to be built with 95 wide overlapping panel over a Z-frame. With regular 21 or 22 mm panel, it gets a bit heavy, so I'm thinking to go down to 17x95 for the covering boards and use regular timber for the Z-frame. But I can't find 17x95 anywhere?

Have I imagined this as a standard dimension?

I live in Trelleborg, so if any southern Skåne residents have seen a timber yard that carries it, I'd be deeply grateful for tips. Or if anyone has any other good suggestions on how to proceed. Planed in a thin dimension is not an option due to the price.

Thanks a lot!

 

[KnockOnWood]

It is probably available at every hardware store.
Here is Byggmax

 

[13th Marine]

Otherwise, the building supply store can probably order it for you, alternatively plane it down.

Woody can probably fix it, I haven't gone to Optimera in several years.

 

[fabbe72]

Panel and råspont are unfortunately not quite the same thing.

Of course, I can check if it's possible to order, the risk is that one might need to order a pallet...

There are hardly any real lumberyards anymore. Maybe I'll have to go to Teckomatop and scout...

 

[Mazen]

https://www.byggole.se/traprodukter/ytterpanel/17x95-mm-enkelfaspanel-gran

http://www.moklintatravaror.se/tjänster-sortiment/panel-list-utomhus/enkelfaspanel-15087287

But unfortunately, you don't have a store nearby, so you'll have to shop online,,

Otherwise, if you go down in dimension, Jern & Fix has wall panel 12x70mm
http://www.jemfix.se/oevriga-paneler__11559/vaeggpanel_012070-0240

 

[fabbe72]

Just realized how unclear I was. What I'm looking for is an unjointed panel board, like raw plank/cladding board, as it is known by many names.

 

[Mazen]

Beijer...

https://www.beijerbygg.se/store/pri...anelbräda-17x95mm-gran-finsåg?artikel=242009#