Where to find 45x220 in lengths over 5m?

[haavard]

How long is it? If it is also 5 meters, I think it will be too weak.

 

[KnockOnWood]

...I custom ordered 4"8" at 5.20 lengths (now I received them at about 6 meters) That is 100x200 mm in dense pine, cost 60 kr per running meter plus VAT and shipping. Indian Wood in Exhärad was the supplier...

Oops!

45x195 6m 39:95 kr/m

http://www.gsbyggvaror.se/produkter/Tra/regel_c24_fingerskarvad.html

But it's quite a distance to travel...

 

[ToRy]

How long is it? If it's also 5 meters, I think it might be too weak.

Total length 3.3 meters but it will rest on 3 post shoes, so slightly more than 1.6 meters between the support points. Should work, right?

This is the construction guide I'm following: http://www.byggbeskrivningar.se/enkelstugan
In that, they use 45x220 as the beam with longer distances between support points. They also use 45x170 as floor joists, so I assume my dimensioning is at least not too weak. Maybe I should use 45x195 for the floor joists anyway....

 

[ToRy]

I think both Exhärad and Eldsberga might be a bit far to travel for 8 studs, but thanks for the tips! I'll check Mölnlycke as mentioned, when I get around to it....

 

[Kung_Ian]

hackatall wrote ...I custom ordered 4"8" at 5.20 lengths (now I got them at about 6 meters). That's 100x200 mm in dense pine, cost 60 kr per meter plus VAT and shipping. Indian Wood in Exhärad was the supplier...

Oops!

45x195 6m 39:95 kr/m

[link]

But it's quite a distance to travel...

Quite a difference between 45x195 and 100x200...

 

[KnockOnWood]

hackatall wrote [bild] ...I custom ordered 4"8" at 5.20 lengths (now I got them at about 6 meters) That is, 100x200 mm in dense-grown pine, cost 60 SEK per meter plus VAT and shipping. Indian Wood in Exhärad was the supplier...



A bit of a difference between 45x195 and 100x200..

Sorry, I see that I missed that the width had increased from the original question's 45 mm.