My parquet floor wasn't completely finished during installation. There is a gap under the threshold at the front door, and this causes the threshold - which seems to be attached to the frame? - to creak and crack. Can it be filled with something, or is there another solution?
If the threshold is not exposed to moisture, it might be possible to slide/push some pieces of stiff cardboard or gray cardboard under the middle of the threshold (I assume the last parquet piece cannot be lifted and removed so you can place something more substantial underneath). But really, it should be enough to securely attach the strip to the threshold. That will likely give the threshold enough support against the parquet, so it stops sagging and creaking.
No, nothing is damp - I've had a rug over the mess the whole time. I'll get what you suggest and yes - the parquet piece is attached. The trim is quite weak and I bought it on my own initiative... maybe there are better options to cover the gap? I see there is no foam underneath either, but maybe that doesn't matter? If I manage to silence the threshold, can I attach the trim with some type of PL-400 or does it need to be screwed in? I'm not much of a handyman and I am so grateful for your response - but a bit apprehensive. What do you think a floor layer would charge for the job - or is it "too small of a job" for someone to take on?
Does the door frame go on top of the threshold? If not, it should be possible to break up the threshold and make a solid base. Otherwise, maybe a small aluminum L-beam that you screw into the side of the threshold could work as reinforcement. This should also be able to cover the gap to the parquet.
No, the frame doesn't seem to go over the threshold and an aluminum strip is probably better than the flimsy "decorative strip" I bought. But the more I look at this - the stranger it looks? Would a flooring professional take this on and at what price, I wonder?
