Scaffolding with or without ladder?

[Jabinski]

Hello
Looking at scaffolding and wondering if you think it's worth the extra money for a ladder between the floors? Considering a ladder between the 2 m and 4 meters level price 3740kr...

 

[Hep]

For anything higher than one floor, I would definitely buy with an internal ladder.

 

[nino]

I have 4 floors at most but 3 hatches with a ladder, I would have preferred to avoid the regular ladder up to the first floor.
I was at a job where they had a stair tower and that was of course even better.

Then you can buy it later if you change your mind.

 

[Jabinski]

I have 4 floors at most but 3 hatches with a ladder, I would have loved to avoid the regular ladder up to the first floor.
I was at a job where they had a stair tower and it was of course even better.

Then you can always buy it later if you regret it

I agree. But damn, it really adds up price-wise

 

[Peter_Ker]

I just bought a scaffolding 3x1.40m with 2 levels and opted for 2 ladders. Incredibly convenient. I also chose a depth of 140 cm plus an additional 30 cm console towards the wall. The scaffolding ended up being twice as expensive but perfect for my needs.

 

[monger]

I have 4 floors at most but 3 hatches with a ladder, would have liked to avoid the regular ladder up to the first floor.
Was at a job where they had stair towers and it was of course even better.

Then you can buy it later if you change your mind

How do you attach the upper floors (gable frame, railing, end stop) on Altrad frame villa packages, i.e., before you have put on the protections (even with a hatch)? Is it alright?

 

[cpalm]

How do you attach the upper floors (gable frame, railing, end-stop) on Altrad frame villa packages, that is before you've installed the covers (even with a hatch)? Is it safe?

Not sure about the Altrad frame villa package specifically, but the challenge is usually the railing. The rest of the parts typically need to be assembled from the floor below.

 

[monger]

Thank you, for structures that Jabinski looked at above, you set both end stops/frame and then the railing on these from the same floor level.

 

[nino]

How do you install the upper floors (gable frame, railing, end stop) on Altrad frame villa sets, i.e., before you've put on the protections (even with a hatch)? Is it safe?

You have to put the floor in first, then the sides and the railing. There might be a smart way, but I have been sitting and sliding forward with the gable. But it's really the same with all the floors... A safety harness and at least one other person is recommended, partly to send tools and also to help if you fall and end up hanging in the harness.