Save screw holes

[NiklasPalmgren]

Hello,
The bracket for the windowsill was loose and yesterday I removed it. I found that the drill hole was not in the best condition (see my attempts at pictures). Most likely, a previous owner also had problems and tried to fix it by drilling deeper and adding an extra plug.

I'm looking for a solution on how to get grip in the same hole. I can't make new holes for the bracket since the holes in the stone slab that will be placed on it are fixed.

 

[Jocke Best]

We've all been there.

Here you can see a bunch of different ways to fix a screw hole. The easiest is probably to hammer in a wooden plug and redrill. Or several small sticks with a bit of wood glue in between.

 

[MultiMan]

https://www.biltema.se/bygg/kemikalier/ovriga-kemikalier/ankarmassa-2000038143 or equivalent from other manufacturers.

 

[NiklasPalmgren]

We've all been there.

Here you can see a bunch of different ways to repair a screw hole. The easiest is probably to insert a wooden plug and drill again. Or several small sticks with some wood glue in between.

[media]

We've all been there.

Here you can see a bunch of different ways to repair a screw hole. The easiest is probably to insert a wooden plug and drill again. Or several small sticks with some wood glue in between.

[media]

Thank you for the help. I'll check out the video.

 

[NiklasPalmgren]

[link] or equivalent from other manufacturers.

Thanks for the help.

 

[useless]

The anchoring compound and threaded rod will hold like a rock.