Post anchors, Built wrong?

[sled]

Hello!

I'm wondering if I've built it wrong or bought poor materials.

I've just finished building a fence.. I mounted my posts on post shoes with lag screws.
However, I felt that the post shoes didn't give the posts 100% stability. More like "about 90%."

So I ended up casting all the posts with some lag screws that were half-screwed in as reinforcement. Now the posts are 100% stable. Have I done something wrong? Anyone else have the same experience with post shoes?
I thought it seemed like a good idea if you needed to replace a post in the future.

Grateful for answers.

// Kalle

 

[Tossegubbe]

Pole shoes are not designed for stability in the X or Y axis but only for bearing capacity in the Z-axis, i.e., directly from above. As far as I know, there are actually no good products for this purpose on the market, so you're referred to, for example, expansion bolts and post bases or similar.

 

[ppalm]

if you want to have stability in the fence, you should cast in anchor bolts
http://live.viivilla.dk/xdoc/articles/0000000467.gif

//P

 

[sled]

Pole shoes are not made for stability in the X or Y direction but only for load-bearing in the Z-axis, i.e., directly from above..
As far as I know, there are actually no good products for this purpose on the market, so one is referred to, for example, expansion bolts and pole foot or similar.

Okay.. Now I understand better. Thanks

 

[Mats]

agree with ppalm. Double plinth/post iron and then it stands still