Plaster

[nickepeck]

Just need to know if the renovingsgips is beveled at the edge like regular drywall.

 

[andersmc]

The plaster I have used has been that way, at least. But it's not certain that all brands are the same.

 

[buspojken]

Facade on the edge it is, and a hell to deal with, I avoid renovation plaster as much as I can

 

[nickepeck]

What are the good and bad aspects of renoveringsgips?

 

[corre]

It is so thin that it directly takes the contour of the substrate. Therefore, it is extremely poor at smoothing out walls because even a minor bump on the wall will be visible through it. Additionally, it is so fragile that it's easy to break during handling and when screwing it up.

I really only have one use for renovation plasterboard, and that's to avoid wide putty on a fairly even but rough plastered wall. Then you can attach it with adhesive and get it pretty even.

 

[nimhed]

The only reason to use renovation plaster is if for some reason you don't have space for the extra 5-6 mm that a normal board adds.

They are more expensive, if you are going to screw, it is harder to hide the screw head in the plaster.

An advantage could be the weight during installation, but I don't think it's that unbearably heavy.

 

[corre]

If it's the weight, there are 90cm boards instead...
They can lift a person, unlike reniveringsskivorna which can't always withstand that.