Panels for the woodshed?

[Joukko]

Where can one find inexpensive timber?
The width should be about 12cm and the thickness about 2cm.

Jocke

 

[Bob_the_builder]

If you have low aesthetic standards, you can use formvirke, for example 22x95 (I think some lumberyards also sell 22x120) and cut away the worst parts before installation.

 

[Joukko]

It doesn't really matter that much how it looks.
What is the approximate price for this?

Jocke

 

[Bob_the_builder]

4-5 kr per meter I might consider.

 

[JohanM]

You can use råspont 23x120, bought it at bejier for 6 SEK per meter = 50 SEK per square meter.
It was ändspontat, so there is no waste.

/Johan

 

[Joukko]

I will have a gap between the boards of about 20mm.

Jocke

 

[Eld]

21*120 costs 7.99 per meter at Byggmax. http://www.byggmax.se

 

[Joukko]

21*120 costs 7.99 per meter at Byggmax. [link]

I've checked there a bit, so I'll probably shop at Byggmax. Cheapest so far for regular boards.

Jocke

 

[charta77]

I have bought 25x135 for 5kr/m. It's a smaller place, but darn cheap.

Maybe you have some smaller "bysåg" that has reasonable prices, the timber doesn't need to be particularly fine either.

 

[Mjölnaren]

When I built our woodshed, I made the walls with "reverse" lock paneling.......
I used 22x145. First, I attached the paneling on the outside and left about 90 in between each. (Had the wall framed horizontally with 45x45.) Then, I placed the locks on the inside. This way, I achieved superb ventilation and protection against rain.