Member
· Blekinge
· 10 117 posts
Yes, now you got it right! Good to have a proper drawing too. Most things suggest that the red-marked part is not load-bearing, but I would still like to know, partly what material the outer walls are made of, and partly how the flooring to the next floor is constructed. The blue concrete in the partition walls can mean that the flooring consists of reinforced concrete and then it can get a bit tricky.
Thanks for the response.J justusandersson said:Yes, now you've got it right! Good to have an actual drawing too. Most indications are that the red-marked section is not load-bearing, but I would still like to know both what material the outer walls are made of and how the floor structure to the next floor is constructed. The blåbetong in the partition walls could mean that the floor structure consists of reinforced concrete, which could make it a bit tricky.
The outer wall consists of bricks, insulation, plaster/concrete.
The basement foundation has a concrete floor, and for the upper floor, it's wooden floor joists.
Member
· Blekinge
· 10 117 posts
Yes, then the wall is certainly not load-bearing. With concrete floors, you can never be quite sure. The reinforcement can be oriented in different directions. It looks like a 1950s house with a well-designed layout.
Which walls would you consider to be load-bearing, the "heart wall" in the middle that runs from the chimney to the other end?J justusandersson said:
Member
· Blekinge
· 10 117 posts
Among the internal walls, it's only the heart wall. You can see the dashed lines at the doorless openings (leading into the bathroom and between the living room and what seems to be the dining room today) indicating that there is some type of arch above.
Click here to reply

