Hi,

We are renovating a room in our brick house from 1962. We removed the vinyl flooring from the room yesterday and heard from a friend that there could be asbestos in the glue if it was black glue. The glue looks quite dark, do we need to worry? Almost all the glue remains on the floor, not much came out with the vinyl flooring.

Rolled-up red flooring material with dark stains, laid on a surface. Potential concern for asbestos in the dark adhesive on the removed flooring. Floor covered with dark adhesive residue after removing vinyl flooring in a 1962 brick house renovation, potentially containing asbestos. Dark adhesive residue on wooden floor after removing linoleum, potentially containing asbestos, in 1962 brick house renovation. Dark adhesive residue on a floor after removing vinyl flooring, possibly containing asbestos, in a room of a brick house built in 1962.
 
It's the dust that is dangerous, so don't sand it.
 
As mentioned, it's the dust that becomes dangerous.
Patch over or replace the floor panels.
 
It is probably likely that it is svartlim and therefore contains Asbestos :/ My advice is, as previously mentioned, absolutely do not sand the floor and I also think you should not replace the floorboards unless you bring in an Asbestos remover!
 
We were advised to leave it as much as possible and lay underlay foam and laminate flooring directly on it. Does that sound silly?
 
It sounds very reasonable as long as any fibers are in the glue, they do no harm whatsoever.
 
Click here to reply
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.