10,161 views ·
13 replies
10k views
13 replies
Is all sill paper/sill insulation compatible with pressure-treated sill?
Friggebod 
Not yet decided if I should use treated wood or not. Saw both a Norwegian and a Finnish video on YouTube where they built garages and the sill was treated (on top of concrete blocks, not near the ground).
Not yet decided if I should use treated wood or not. Saw both a Norwegian and a Finnish video on YouTube where they built garages and the sill was treated (on top of concrete blocks, not near the ground).
Why not? There seems to be a prevailing misconception on this forum that treated wood causes odors and discomfort if used as a sill, etc.Åsa Lund said:
Until the late 70s, pentachlorophenol was used in the impregnation, causing a nasty smell in houses with treated wood sills and crawl spaces. Pentachlorophenol is now banned.
Last edited:
S
SueCia
Electronics enthusiast
· Dalarna
· 5 543 posts
SueCia
Electronics enthusiast
- Dalarna
- 5,543 posts
If you feel the need to use pressure-treated sills, then you already have a risky construction from the start. It's better to address the root problem than to try to patch it with pressure-treated wood. It is suitable for terrace floors and stairs, not more.öringen said:Why? There seems to be a prevalent misconception on this forum that pressure-treated wood causes smell and discomfort if used as a sill, etc.
It was until the late 70s that pentachlorophenol was used in impregnation, which caused a bad smell in houses with pressure-treated wood sills and crawl spaces. Pentachlorophenol is now banned.
Do you have to have a risk structure just because you choose pressure-treated wood? If Klicka wants to use pressure-treated wood, I think he can do it without a problem even if it were a dwelling house.SueCia said:
Last edited:
There you are wrong, öringen...
You should avoid embedding materials with a lot of chemicals unnecessarily.
If you need wood to build a wooden wall, you should use as pure wood/building material as possible and ensure that it is given the right conditions to function properly without risk of decay, etc.
You should avoid embedding materials with a lot of chemicals unnecessarily.
If you need wood to build a wooden wall, you should use as pure wood/building material as possible and ensure that it is given the right conditions to function properly without risk of decay, etc.
and you also don't spend two-thirds of your life inside the wallÅsa Lund said:
but I would also never use treated wood in the sill!
S
SueCia
Electronics enthusiast
· Dalarna
· 5 543 posts
SueCia
Electronics enthusiast
- Dalarna
- 5,543 posts
I said if you feel the need for pressure-treated wood, then you have a risk structure. I have to say that I'm a little surprised, I never thought I would ever have this discussion.öringen said:
I agree with you there. But that there would be any problem or risks with using today's pressure-treated wood in the sill, I have yet to see any good explanations for here on the forum.SueCia said:
Click here to reply