Hi awesome group. A while ago, I got help to clear up my thoughts on how to put together a future framework, and I've read/watched videos that you can staple the sill insulation directly onto the sill before raising it. But how do you do that if you divide the wall into smaller sections of about 4m, then you can't staple it beforehand I think, or do you install the insulation/wall section in that case, and what do you do with the joints in the insulation? I've read that you're supposed to tape the insulation seams, but you can't do that if it's stapled to the sill and a part is already raised.
Or am I thinking completely wrong?
Then I read that the sill should be 5-10mm wider than the sill, but some sill insulation is the same width as the sill, so I got confused there as well.
Grateful for help to clear up these question marks. I'm going through the construction in my head now, to be a little prepared
Or am I thinking completely wrong?
Then I read that the sill should be 5-10mm wider than the sill, but some sill insulation is the same width as the sill, so I got confused there as well.
Grateful for help to clear up these question marks. I'm going through the construction in my head now, to be a little prepared