How to attach raw planks to the ceiling?

[kniv]

Where does the recommendation for 75mm nails come from?

 

[Gubben Ubbe]

Where does the recommendation for 75mm nails come from?

General recommendation: nail length 3 times the material's thickness.

 

[Tjrex]

Coiled panel nails 47mm so they don't go through and stay as solid as a rock.

 

[kniv]

General recommendation: nail length 3 times the thickness of the material.

Given that you have material behind to attach the subject to. Now you only have 28mm, so your general recommendation becomes somewhat toothless when trying to apply it for this.

 

[Gubben Ubbe]

Given that you have material behind to attach the subject to. Now you only have 28mm, so your general recommendation becomes somewhat toothless when you try to apply it to this.

Yes, a better way to phrase the question would have been: Do I need to switch to a thicker sparse to be able to attach my 22 mm råspont?

 

[Utsliten och utdömd]

No, I have used 28mm spaced tongue and groove and I'm installing paneling that is 15mm. When I use 50mm nails, most of them don't go through, except for a few that have gone through. I nail at maybe a 55-45 degree angle with the nail gun in the groove.

 

[useless]

Yes, a better way to phrase the question might have been: Do I need to switch to a thicker framework to be able to attach my 22 mm raw wood?

No. Instead, switch to shorter nails. You don't need 75 mm nails for the boards to stay in place.

 

[kniv]

Yes, a better question might have been: Do I need to switch to a thicker gles to be able to attach my 22 mm råspont?

No

 

[Vante]

Angle shoot with 1.8mm brads.

 

[AndersS]

Have shot panel with a brad nailer and 40-50 mm. But also screwed with panel screws when flooring with rough tongue and groove boards. And of course in the tongue at 45 degrees at an angle.
https://www.jula.se/catalog/bygg-oc...EomwjLMDPgTJXWBbiCxoCCGYQAvD_BwE&gclsrc=aw.ds

 

[Huzzbutt]

Buy fine-sawn slat instead. You get a similar impression but with more consistent quality, and you can reduce the fasteners' dimensions. The slat measures 15 mm.