Hello
I am planning and have sketched out a garage I want. Now that I've submitted it for drawing, questions are arising about the dimensions of the glulam beams and whether I should have an HA beam, and so on.
I need help with someone who can calculate what dimensions the beams should have to support the weight and be approved by the building committee.
Looking at the picture, it is 7m high in the middle.
I have planned for half of the garage, the one with the higher ceiling, to have a storage room on the upper floor with an open part in the other section of the garage, allowing a view down into the garage from above.
The garage below is to be completely open (no poles in the middle supporting the storage floor).
The reason I want the storage floor on one half is because in the other half the ceiling height is about 4m, allowing for a car lift, for example. The other half will have a ceiling height of about 2.40 with a storage floor above it.
The Leca foundation will be 1.30m behind the garage and 1.30m on the side where it says 1m (changed to the draft proposal).
Is it considered a basement garage then?
I need to know what dimensions I should use to cover 7.7m for the ridge and to support the storage floor.
Grateful for ideas and tips!
Click here to reply
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.
