Forgot where we set up the support beam

[Patzie]

There are 2 pieces of 45x70 under the 220 one and it looks like almost another could fit between the top of the window and the lower one, and almost one more between the 2 that are there, so 4x45 =180 so 180 mm from the top of the window and you're at least at the bottom of the 220 one.

 

[Pligg85]

Doesn't frost form on the panel that otherwise reveals the beam in the right weather change?

But with the image as support, it became super easy to aim correctly.

 

[tgr_se]

It should be possible to see where the panel is nailed. From there you also get an approximate measurement to compare with.

 

[Hammare&Spik]

Doesn't frost appear on the panel that reveals the beam otherwise in the right weather shift?

I hadn't thought about that. Smart

But with the picture as support, it became super easy to aim correctly

 

[Hammare&Spik]

You should be able to see where the panel is nailed. From there, you also get an approximate measurement to compare with.

That's smart too!

 

[Hammare&Spik]

There are 2 pieces of 45x70 under the 220 and it looks like almost another could fit between the top of the window and the lower one, and almost one between the two that are there, so 4x45 = 180 so 180 mm from the top of the window you should be at the bottom of the 220 at least

24-25cm above the top of the window should be the middle approx.
Thank you all for helping me find solutions. I appreciate it ❤️❤️❤️