Edge-glued oak?

[matte2k]

What is the price of lamella oak per meter... in the dimensions 3-4 x 4-5 cm?... at the slightly cheaper building supply stores?

 

[elof]

Bauhaus has ekskiva in its flyer(http://www.webbkampanj.com/bauhaus/katalog/v06/)
3020x625x40 - costs 1995 SEK

Sure, the department stores may have decent prices, but if you're looking for that little extra, or something that can't be found anywhere else, check with pondus, they have/can bring in most things!
You also get really good service

http://www.pondussnickeri.a.se/

 

[matte2k]

meant with rods with oak... so not a countertop...

 

[elof]

Okay you will have to glue them together yourself (I have a feeling you are going to make a sideboard with alternating long and short slats so you don't have to "make" the tenons )

I think you should talk to a carpentry shop if you want to get hold of such raw material, I haven't seen anything like it in department stores, they only sell prefab  

 

[matte2k]

hehe... maybe, maybe

yeah.. that's what I thought then

 

[Fagerborn]

Okay, you have to glue them together yourself (I have a feeling you're going to make a drop-leaf side table with every other slat long and every other short so you don't have to "make" the joints )

I think you'll have to talk to a joinery if you want to get hold of such raw material, I haven't seen anything like that in the stores, they only sell prefab

But the carpenter must buy them somewhere .....

 

[AndersS]

Maybe where the carpenter buys glue and knektar

 

[David]

Costs between 60-100 SEK/sqm at Castorama in Poland. I have some pictures but they are too large to upload and I don't feel like making them smaller.

Best regards,
David

 

[AndersS]

One disadvantage of the boards hardware stores sell, if you plan to use them for furniture, is that they are finger-jointed, which is visible on the long side as a zigzag pattern.