Hello and sorry if I'm not using the correct building terms.
I need to "build out" all the studs in the exterior wall inward towards the interior wall by about 12mm. So, inside the insulation and the vapor barrier.
How do I do this in the best way? Is there ready-made material available in the size 12x45mm?
I wasn't planning to add more insulation either, so there will be a gap/air gap of 12 mm along the entire wall. Is there any danger/risk with that?
I hope I'm clear.
Thank you in advance
I need to "build out" all the studs in the exterior wall inward towards the interior wall by about 12mm. So, inside the insulation and the vapor barrier.
How do I do this in the best way? Is there ready-made material available in the size 12x45mm?
I wasn't planning to add more insulation either, so there will be a gap/air gap of 12 mm along the entire wall. Is there any danger/risk with that?
I hope I'm clear.
Thank you in advance
Isn't it just a matter of splitting a plank to the right dimension? If you split a 95x45 plank, you should get six pieces of 12x45 (excluding the blade width).
there is strölökt in 12*50
what can happen is that you get a drum sound
what can happen is that you get a drum sound
roughly like beating a drum. even if not directly going around and hitting the walls, I think when the TV or stereo is on, there is a strange echo