Build in compressor

[Nissesbygg]

We have a compressor in the garage that we plan to enclose. The construction itself is straightforward and will be about 2 x 1.50 x 1 meter. However, with all the materials including insulation, it will weigh quite a bit. I'm wondering if anyone has an idea for material that doesn't weigh too much. I want to be able to lift it off for maintenance.

 

[Pjosk75]

Lightweight materials to build with are chicken wire and cardboard. But I believe you want it to be stable as well. In that case, OSB is an option.

Does the entire structure need to be removable, or is it enough to remove each side, for example?
If so, you can build a roof supported by 4 legs and sides that are screwed in place.

 

[Nissesbygg]

Light materials to build with are chicken wire and cardboard. But I think you want it to be stable as well. In that case, OSB is an option.

Does the entire structure need to be removable, or is it enough to remove each side, for example?
In that case, you build a roof standing on 4 legs and sides that are screwed on.

Thanks, sometimes you become blind to the obvious. Naturally, it will be easier to do as you suggest.

 

[Lgr59]

Why not hinges against the wall