Build a curb on existing concrete floor in garage, install sheet metal?

[Suhagg]

I have a carport with a slab on the ground where there is a floor drain and wooden walls.
In the winter, when there is a lot of slush running off the car, it can sometimes be damp near the walls despite the slope toward the drain.

In retrospect, I would now consider building something up with bricks or protecting the wooden wall in some other way.
Maybe it's easier to attach a sheet metal that I glue with PL400 against the concrete and then screw into the wall? It's not like water is gushing against the wall.

Just looking for an easy solution to protect the wall.

 

[Totem]

I have a carport with a concrete slab floor where there is a floor drain and wooden walls.
In the winter, when there's a lot of slush running off the car, it can sometimes be damp near the walls despite the slope towards the drain.

I'm considering now adding some masonry or protecting the wooden wall in some other way.
Perhaps it's easier to attach a metal sheet that I glue with PL400 to the concrete and then screw into the wall? It's not like water is gushing towards the wall.

Looking for an easy solution to protect the wall, simply put.

I have this problem too. I'm considering the metal sheet solution but with some sealant against the floor instead.

 

[Suhagg]

Will be an L-shaped metal sheet and suitable sealant against the concrete floor. Then I'll let the wood material I plan to use on the walls end 3-4 cm from the floor.

 

[Totem]

Sounds like a good idea. I'm planning to make a similar solution.

Sent from my HTC Desire S using Byggahus