I will use floor rails and ceiling rails made of sheet metal. Then either wooden studs or metal studs.
The question is what should I screw into the floor/ceiling rails with, it's a wooden floor and 13mm gypsum ceiling?? Will regular drywall screws work??
The same with the studs that need to be attached to the rails, do you nail or screw them, and with what??
It will just be a 60cm wall to divide the room.
Thanks
The question is what should I screw into the floor/ceiling rails with, it's a wooden floor and 13mm gypsum ceiling?? Will regular drywall screws work??
The same with the studs that need to be attached to the rails, do you nail or screw them, and with what??
It will just be a 60cm wall to divide the room.
Thanks
Use wooden studs, it will be a bit sturdier. You can fasten all the studs with drywall screws. For the ceiling track, you need to make sure to hit a sparse board that the drywall ceiling is screwed into. It's not enough to just screw into the drywall, you'll also need to glue with a construction adhesive.
Good luck!
Good luck!