Wide tongue and groove cladding boards?

[fsn]

Looking for wide single tongue and groove or Z facade panel. You see it in a horizontal design on many houses, and it gives a modern, powerful and somewhat calmer impression than regular facade panels.

But where can I find it? I've checked online with the usual building merchants and the widest I find is 145mm, which is the same as I have today.

 

[Staffans2000]

Look up a sawmill nearby and speak directly with them.

 

[Peter2400]

Looking for thick single tongue and groove or Z facade panel. You see it in a horizontal layout on many houses, giving it a modern, powerful, and slightly calmer impression than regular facade panels.

But where can I find it? I've checked around online at the usual building supply stores, and the widest I can find is 145mm, which is the same as I have today.

Roasjö träförädling cuts glue-laminated wood panels to your specifications, I'm also a bit tempted.
But you probably have to budget closer to 300:-/sqm if you want it primed.
No waste, though, end-matched boards that don't need a batten behind the joints.
https://mobil.blocket.se/annons/alvsborg/limtrapanel_och_limtratrall/77082404

 

[fsn]

I am looking for standard panels. You see them on every other new house, and I am absolutely sure that the house manufacturers are not slicing glulam or making special orders.

 

[Robert-san01]

We bought 200 wide glulam panel from Martinssons. They, along with Setra, can usually be ordered by most building supply stores.

They both have standard assortments that are stocked in slightly different lengths and treatments.

 

[Peter2400]

I'm looking for standard panels. You see it on every other new house and I'm absolutely sure the house manufacturers are not slicing glulam or making special orders.

Here it is, http://www.virkedirekt.se/produkt/22x195-enkelfas-m2/

 

[fsn]

Here it is, [link]

That's exactly what I'm looking for. Big thumbs up for that.

I just hope it can be delivered to Gbg for a reasonable price. It's not that many square meters involved.

 

[fsn]

Here it is, [link]

I have checked with this supplier and the only issue is the delivery cost. I need so little that 60-70% will be delivery cost. It becomes prohibitively expensive boards.

Anyone have suggestions for single-faced, double-faced, Z-panel or anything wider than 145mm in or near Gothenburg? If I get to choose freely, 195mm is preferable.

 

[chevan]

Exceptional precision cutting...great and fantastic service

 

[fsn]

Åttersta såg...kilade och fantastiskt service

That thing about "in or reasonably close to Gothenburg" completely passed you by, didn't it?