Which screw for reinforcing door opening?

[osiris]

I am going to widen a doorway and will reinforce with a glulam beam (90 thick) above and studs on the sides (45 thick), in accordance with the constructor's instructions. But which screws should I use (and in what dimensions)? The glulam beam at the top and one side stud will be screwed into timber, and the other side stud into brick...

 

[Mazen]

6x140 resp 6x90, alt 5x90.
E.g. Essve..
https://fellessonsbygghandel.woody.se/essve-traskruv-cutters-forsankt-98

For the brick wall a good nylonplugg, e.g. Essve N..
http://essve.se/webcatalogue/infastning-gips-stenmaterial/397476-nylonplugg-n-nl/

 

[osiris]

6x140 or 6x90, alternatively 5x90.
For example Essve..
[link]

For the brick wall a good nylon plug, for example Essve N..
[link]

Thanks! Do you use the same screws for the plugs in the brick wall, or are different screws needed for them?

 

[Mazen]

Thank you! Do you use the same screw for the wall plugs in the brick wall, or is there a different screw you should use for them?

You use the same screw.
Plug N8 - screw 5.0 and N10 - screw 6.0
An 8 mm plug and screw 5x90 should be sufficient, or alternatively 5x100.
My tip is to screw them slightly offset with a C/C of about 50.

Something like this...