I have some problems here in this corner..... as you can see.... does anyone have some tips.. Ended up with different ceiling heights in the house which is causing issues.
Can't you pull the cladding all the way up and pull the L-profile all the way towards the cladding and then ceiling trim as now but meeting a small mitered piece towards the end.
A bit tricky situation. Here's what I'm thinking if it works:
1. Place a block
2. Forget the outer corner strip and round rod
3. Connect the gooseneck to the block
4. Hide the level difference in another ceiling strip that comes towards you in the picture
5. Thinner trim on the left in the picture
A bit tricky situation. Here's how I'm thinking if it's possible:
1. Place a block
2. Ignore the outer corner strip and round strip
3. Connect the swan neck to the block
4. Hide the level difference in another ceiling strip that faces you in the picture
5. Thinner trim on the left in the picture
This is how I ended up doing it.
Click here to reply
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.
