Tips on how to cut wall panels

[ninhuo]

Hello, I need tips on how to neatly cut wall panels that will lie against the stringer.

 

[Cheesen]

Hi, I need tips on how to neatly cut wall panels that will sit against the stringer.[image][image] [image]

A round quarter round molding.

 

[FredrikR]

Hi, I need tips on how to neatly cut wall panels that should be against the stringer.[image][image] [image]

Trace the shape of the stringer, jigsaw from the back or for example, plunge saw from the top.
I believe I used both saws.
Quarter round molding or soft seal at the bottom then depending on how much needs to be concealed.

 

[b8q]

First, make a template out of paper. It is cheap to modify and, for example, tape on extra pieces if you have cut away too much.

 

[ninhuo]

Thank you very much for your answers, will get back with pictures later.

 

[ninhuo]

A little follow-up I took down the stairs when I discovered mold up by the ceiling on an old wooden beam. Started tearing down in the bathroom because we were going to renovate the bathroom but it ended up with having to tear down quite a lot when we discovered both mold and rot in the old construction. So all the walls are gone now and I will build up new ones and a new staircase is coming to us.