5,556 views ·
9 replies
6k views
9 replies
The leaf blower spits out water - in quantities !
Hello everyone!
I have a leaf cleaner
(see image) that is mounted on the wall and serves two downspouts that join in a Y just above the cleaner.
In the past few weeks, there has been almost torrential rain around Lund here in Skåne, and I note with disapproval that when it rains the worst, water almost sprays out of the cleaner and then down onto the sandy ground below, which happens to be right next to our basement.
You plumbing wizards - is there any ready-made or simple solution to "secure" the leaf cleaner so the water doesn't splash out of the opening during heavy rain? Or are there smarter cleaners?
I have searched for the latter products - but can only find this standard model.
Very grateful for responses and ideas / Jörgen
I have a leaf cleaner
(see image) that is mounted on the wall and serves two downspouts that join in a Y just above the cleaner. In the past few weeks, there has been almost torrential rain around Lund here in Skåne, and I note with disapproval that when it rains the worst, water almost sprays out of the cleaner and then down onto the sandy ground below, which happens to be right next to our basement.
You plumbing wizards - is there any ready-made or simple solution to "secure" the leaf cleaner so the water doesn't splash out of the opening during heavy rain? Or are there smarter cleaners?
I have searched for the latter products - but can only find this standard model.
Very grateful for responses and ideas / Jörgen
I meant that if you don't have stormwater pipes of larger dimensions, weren't they narrower before, than the 110 pipes used today.
Some ideas
* Horizontal filter
* Split the pipes
* Make a cover for the filter, which you can remove and clean.
* Solid pipe with filter in the gutter
And of course, check to make sure there's no blockage or partial blockage in the pipe after the filter.
It may be that the water force becomes large and when it hits the filter grate, some splashes outside.
Some ideas
* Horizontal filter
* Split the pipes
* Make a cover for the filter, which you can remove and clean.
* Solid pipe with filter in the gutter
And of course, check to make sure there's no blockage or partial blockage in the pipe after the filter.
Thank you for many great ideas!
I think I will experiment a bit with making a "protective cover" for the opening, if that doesn't work, I will definitely get a lying leaf guard (appreciate the tip!!).
Best Regards, Jörgen
P.S - no, as far as I could understand, there hasn't been a blockage in the drain, stormwater drainage.
I think I will experiment a bit with making a "protective cover" for the opening, if that doesn't work, I will definitely get a lying leaf guard (appreciate the tip!!).
Best Regards, Jörgen
P.S - no, as far as I could understand, there hasn't been a blockage in the drain, stormwater drainage.
If you don't have many deciduous trees around the house, the "horizontal" one is preferable. But you have to empty it, otherwise, it could get blocked and the downpipe might freeze and burst.kinshasa said:Thanks for many great ideas! I think I will experiment a bit with creating a "protective cover" for the opening, if it doesn't work, I will definitely get a horizontal leaf trap (appreciate the tip!!).
Best Regards Jörgen
P.S - no, as far as I could understand there hasn't been a blockage in the drain, rainwater drainage.
Click here to reply