Time for a fun thread start!
Do you have an odd, idiotic, ingenious, or just strange solution to a problem you've encountered?

Then show that solution with a picture or an explanation!

It can be something you or someone else came up with.

A complete blunder, or something you're proud of. It's open season!
 
Drilled holes in the drain located in the floor slab.

Sawed a small hole next to it and rotated the pipe 180 degrees and glued a plug.
 
Sewage problems, it is NOT fun, but it's all the more fun when you outsmart a plumber: 😉

I was working as a carpenter where the customer had a water purification system that overflowed onto the floor when it backwashed. The plumber said nothing could be done about it due to the trap in the floor drain - there is a limit to how fast floor drains can take in water. He said and shrugged his shoulders.

The next day, he was surprised when he saw that I had drilled a hole in the trap's flat part and connected the tell-tale pipe (22 mm) with an electrical fitting size 25mm.

Tight and neat, no water on the floor without affecting the floor drain's function. :-)

The water now went directly down the drain without going through the trap.
 
hackatall said:
A complete blunder, or something you're proud of. Feel free to share!
You shouldn't press too hard on a paint bucket if it's made of plastic and the lid is too difficult to put on. The whole bucket/lid will bend

A hand covered in white paint, possibly from handling a plastic paint bucket with a difficult lid.
 
  • Like
hackatall
  • Laddar…
Click here to reply
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.