What do you think about this construction as a base for a tiled floor?
Wood floor joists c 600, 28x120 spars with underfloor heating plates and tubing, double floor gypsum board, first layer screwed, second layer glued. In the bathroom, joists c 300. How do you create the slope towards the floor drain most easily in this construction?
Wood floor joists c 600, 28x120 spars with underfloor heating plates and tubing, double floor gypsum board, first layer screwed, second layer glued. In the bathroom, joists c 300. How do you create the slope towards the floor drain most easily in this construction?
If you have plenty of money, you level the entire slope with self-leveling compound. Otherwise, you can glue another gypsum board which you cut to get the right slope, then apply the self-leveling compound (that way you use less).
So. The extra board has a large hole (about 1m in diameter) around the drain.
/CC
So. The extra board has a large hole (about 1m in diameter) around the drain.
/CC