Slatwall white, where?

[Timm]

Searching frantically for a new ceiling and looking for pre-painted white panel boards of the type groove panel that are tongue and groove. Found these at beijer http://www.beijerbygg.se/store/priv...-4019-furu-vitmålad-15x120mm-l-4-8m-900141228, but was at beijer in örebro and they wanted about 2000kr in shipping to order them to the store, which didn't feel great! Does anyone know if there's something similar available?

Thanks in advance"!

 

[jonegustafsson]

Hello,

First of all, 800kr/m2 ?? Check with BF:s in Norra Bro, they handle most things.

 

[mlkjhr]

http://www.byggmax.com/se-sv/byggva...nel/panel-invandig/08414121/faspanel-13x120mm

This is not white painted but white waxed. Installed it on the guest house ceiling and walls last summer. I'm satisfied with it.

 

[Timm]

Really don't want to buy untreated and mess around with painting. Don't want white-waxed either. There must be more retailers?

 

[hantverkare1]

Looking like crazy for a new ceiling and searching for pre-painted white panel boards of the type groove panel that are tongued and grooved. Found these at Beijer [link], but I was at Beijer in Örebro and they wanted about 2000kr for shipping to order them to the store which didn’t feel so fun! Does anyone know if there's a similar one available?

Thanks in advance"!

This one should work, right?

http://www.byggmax.com/se-sv/byggva...nel-invandig/08414126/finsagad-panel-13x120mm

 

[Timm]

Is it not spliced at the ends? What lengths are they sold in, you think?

 

[hantverkare1]

It isn't spliced at the ends, is it? What lengths are they sold in, do you think?

No idea is my answer to both questions.

 

[Timm]

Doubt that it is sheet piled, and seems to be a weird white paint on them, shame because it was a good price!

 

[Hammer_SWE]

Isn't it tongue and grooved at the ends? What lengths are they sold in, do you think?

I installed it in one place in our house.
It's tongue and grooved on the top and bottom but not on the short sides, which isn't common as far as I know.
I attached it with some clips that come with it to avoid nail holes, but it was one of the toughest things I've done, really difficult...
I don't think these are the best for ceilings by the way.
Rent a Paslode and nail them up instead.

The lengths available when I bought were 3.6 & 4.8.
It's quite rough on the surface, almost splintery, so just be aware of that...

 

[Timm]

I have placed it in one area of our house. It's tongue and grooved on the top and bottom, but not on the short sides, which is not common as far as I know. I attached it with some corresponding clips to avoid nail holes, but it was one of the toughest things I've done, really rough... I don't think these are the best in the ceiling by the way. Rent a PassLoad and nail them instead.

The lengths available when I bought were 3.6 & 4.8. It's quite rough on the surface, almost splintery, so just be aware of that...

Okay! Thanks for the info! Then it won't be that one, I want a smooth panel like the one from beijer and that is end-matched.

 

[MUSS]

There is some type of lacquered MDF in the dimensions you mentioned, I think I bought it at lakkapää or krauta, I think they were really nice.

 

[Timm]

Don't want MDF, the joints won't look good!