Sheet metal triangular strip...

[anra]

Anyone know where to buy sheet metal for my flat roof? I recently redid my garage roof and on the edge, there is a triangular strip (50mm) on top of 22mm rough-sawn wood. Since you need to nail the roofing felt edge (the overhang) into the rough-sawn wood, the metal needs to cover at least 72mm down over the edge. Since this is quite a standard solution, I thought it wouldn't be difficult to find this metal at the hardware stores, but after searching for a while without finding any, I'm hoping someone here knows, otherwise, I guess I'll just have to bite the bullet and call in a plåtis...

 

[anra]

has no one had this problem before?

 

[MaZtoR]

Draw up how you want the metal sheets to look and then call the nearest metalworker and ask him to make the sheets according to your drawing. It shouldn't be more expensive than buying them from a store. At least not when we do it,

 

[anra]

Ok, then it's time to call in plåtis! Thanks!