Hello!
I have poured a floor in my old garage 20 mm below the remaining floor with Finja EPS concrete. Now I plan to level it with Finja Floor Leveling Allround.
1. How should I attach the reinforcement mesh to the EPS concrete?
2. I am considering using level markers, can/should I leave them in the leveling compound?
3. The area is only 11 sqm. Is there any point in dividing the floor with barriers or should I level the entire floor directly?
Very grateful for answers!
I have poured a floor in my old garage 20 mm below the remaining floor with Finja EPS concrete. Now I plan to level it with Finja Floor Leveling Allround.
1. How should I attach the reinforcement mesh to the EPS concrete?
2. I am considering using level markers, can/should I leave them in the leveling compound?
3. The area is only 11 sqm. Is there any point in dividing the floor with barriers or should I level the entire floor directly?
Very grateful for answers!
Thank you! I am laying out the reinforcement mesh. There is quite a bit of overlap in some places. Consistently overlapping 2 squares, when laying out on the second row it becomes quite high since it's 3 reinforcement meshes layered on top of each other (planning to use about 20 mm of self-leveling compound), i.e. the second mesh of the first row overlaps the first in the row, then the first mesh of the second row lies over both the first mesh of the first row and the second mesh of the first row (see image). Is it done correctly?huggan said:
