Tjoflöjt!
I've come to the roofing stage on the porch. Found a few threads on the forum, but not many solutions... There must be some way to seal between the roof and the façade? I have vertical Z-paneling, so water can travel down through the gaps. I'll be folding up the underlayment against the façade, should I fill and spread asphalt adhesive to make it tight? Then when the tiles are on, add metal flashing, and fill with some black silicone up to the edge of the metal?
Any other smooth solution?
I've come to the roofing stage on the porch. Found a few threads on the forum, but not many solutions... There must be some way to seal between the roof and the façade? I have vertical Z-paneling, so water can travel down through the gaps. I'll be folding up the underlayment against the façade, should I fill and spread asphalt adhesive to make it tight? Then when the tiles are on, add metal flashing, and fill with some black silicone up to the edge of the metal?
Any other smooth solution?
Actually, the panel should have been cut off so that a sheet could be inserted inside the panel, that's the correct method.
https://www.traguiden.se/konstrukti...slutning-mot-takkupa-eller-hogre-byggnadsdel/
Edit:
A thread on the forum where someone has a problem with rotten panel against a lower roof, there are also proposals for solution(s),
https://www.byggahus.se/forum/threads/anslutning-av-uterumstak-mot-fasad.253041/
https://www.traguiden.se/konstrukti...slutning-mot-takkupa-eller-hogre-byggnadsdel/
Edit:
A thread on the forum where someone has a problem with rotten panel against a lower roof, there are also proposals for solution(s),
https://www.byggahus.se/forum/threads/anslutning-av-uterumstak-mot-fasad.253041/
Smart alek
· östergötland
· 2 668 posts
One variant is to saw a groove in the panel and then insert a sheet (väggskiva) there.