Buskfyggaren #1 Member · Stockholm · 122 posts 20 Dec 2017 at 4:13 PM Buskfyggaren Member Stockholm 122 posts 20 Dec 2017 at 4:13 PM #1 I'm going to mount something on the wall that was previously screwed in with screws in anchors. The anchors are still in the wall, is it okay to reuse them? What should I do otherwise? Try to pull them out and insert new anchors?
I'm going to mount something on the wall that was previously screwed in with screws in anchors. The anchors are still in the wall, is it okay to reuse them? What should I do otherwise? Try to pull them out and insert new anchors?
E etompau #2 Member · Skåne · 14 788 posts 20 Dec 2017 at 4:17 PM etompau Member Skåne 14,788 posts 20 Dec 2017 at 4:17 PM #2 I had tried inserting a new screw into the plug. You're at risk of damaging the wall if the plug is pulled out.
I had tried inserting a new screw into the plug. You're at risk of damaging the wall if the plug is pulled out.
L least #3 Member · 251 posts 21 Dec 2017 at 12:33 PM least Member 251 posts 21 Dec 2017 at 12:33 PM #3 Cut off the front of the plug, then push the plug in if it's a drywall. For concrete walls, just reuse if the plug seems to have a good grip.
Cut off the front of the plug, then push the plug in if it's a drywall. For concrete walls, just reuse if the plug seems to have a good grip.
H heimlaga #4 Member · Österbotten · 11 447 posts 21 Dec 2017 at 11:08 PM heimlaga Member Österbotten 11,447 posts 21 Dec 2017 at 11:08 PM #4 If the plug is not made of plugmassa. Pluggmassa is over 90% asbestos and should be handled very carefully.
If the plug is not made of plugmassa. Pluggmassa is over 90% asbestos and should be handled very carefully.
