Put up curtain rod, drywall..

[peithan]

What type of plug should I use? The rod is almost 3 meters, should it be metal expansion plugs? I think it’s single drywall. Probably need to support the middle of the rod too, so it doesn't bend. What do you say?

 

[Helioz]

Here are the absolute best drywall anchors I've used.
http://www.norwesco.se/page/350/362/660

Equivalent at Gunnebo:
http://www.gunneboindustries.com/sv...--Plugg/Skivinfastning/Skivinfastning-HW-PRO/

Just hammer in (the mini anchors) and screw up. If they are misplaced, just pull them out and reuse, with very little impact on the wall, which can easily be patched up with some fine filler. Make sure you follow the screw recommendations so they fasten securely.

 

[peithan]

There aren't any of those in the stores where I live.. Is it possible to use metal expanders? There have been holes there before, now patched, but can you place a plug in the same spot? I don't know exactly where it is, how does it work? Or will the filler just come off and I'll get a huge hole? The wall is fully covered with filler..