Outdoor storage

[Wilkha]

Hello everyone. First post I'm writing here, so I hope for some feedback Warning for long post, but please help me anyway haha

I'm renovating and fixing up the outbuilding, which will then serve as a small woodworking shop.

The area is about 12 square meters.

The floor beams will be about 2.40 meters long, and with a central bearer on blocks, they will meet the joist in the middle, so the beams only span about 1.20 meters unsupported.

My question is, what type of flooring should I use? I should mention that the space is not and will not be insulated. My first thought was to just use raw planks? I should add that I have a combination machine that weighs maybe 2-300 kilos max. But does it really matter what flooring is used, or is it the support underneath that is relevant?

For flooring, I was thinking raw planks because it feels comfortable and convenient. But I also started thinking about chipboard? Many I've asked say "lay raw planks," but no one seems to recommend chipboard. Why? I'm thinking that IF I decide to insulate in the future, it should be easier to lift chipboard than a lot of raw planks?

My father-in-law suggested laying raw planks, chipboard, and then laminate flooring for a smooth surface. But the laminate will get incredibly slippery. Plus, it feels a bit overkill to use both chipboard and raw planks.

Sorry for the long text, hope someone has the energy to read hahaha...

 

[fremax]

Welcome
Would avoid particle board and laminate as these tend to swell from moisture and dampness.
Easiest to use wood that dries out in a reasonable way.


Sincerely, fremax

 

[Rabbithole]

Tongue and groove boards will be excellent. But maybe a plastic mat on top to make it easier to clean?

 

[Wilkha]

Welcome
Would avoid chipboard and laminate as these tend to swell from moisture and humidity.
Easiest to use wood that dries out in a sensible way.


Kind regards, fremax

Like raw wood?

 

[Wilkha]

Tongue and groove wood panels would be excellent. But maybe a plastic mat on top to make it easier to clean?

I was also thinking about having something like a mat to make cleaning smoother.

 

[Rabbithole]

Go to a carpet store and check out one you think fits. The hardware stores usually have them too but with a smaller selection at the same price.

 

[KnockOnWood]

Raw wood is not smooth and planed.
Buy real flooring wood instead:
PINE FLOORING B QUALITY
PINE FLOORING B-QUALITY

26X190 MM END-TONGUED 149:-/M2
http://www.gsbyggvaror.se/?page=product&category=25&product=395#product

Where in the country is the storage located?

 

[Wilkha]

In Västerbotten