How do you handle opened tubes?
When the major renovation is complete, sometimes you need a splash of våtrumssilicon, some pl400, or similar, but mostly you end up throwing away half-full, dried tubes.
I've tried screwing on the nozzle with plastic in between, works poorly. Nail in the nozzle seems to work for a few days, then it's over...
Tips?
When the major renovation is complete, sometimes you need a splash of våtrumssilicon, some pl400, or similar, but mostly you end up throwing away half-full, dried tubes.
I've tried screwing on the nozzle with plastic in between, works poorly. Nail in the nozzle seems to work for a few days, then it's over...
Tips?
Member
· Nuevo Estockholmo
· 3 529 posts
A piece of tape to make it tight.
If it stays for a long time, you need to replace the nozzle or cut off a bit of the tip of the nozzle.
If it stays for a long time, you need to replace the nozzle or cut off a bit of the tip of the nozzle.
throws away the tube. after storing it with the old tip on. you do have the extra tip