Need advice on how to fix the wall behind the wood stove and sink.

[JohanLun]

We had a sheet metal flue designed to connect spiral ducts. There are many regulations about this. Google imkanal.

Chimney sweeps differ, but I've heard that enclosing a chimney with gypsum is not okay. You can probably find the rules about this...

 

[karincam]

Thank you! Super helpful to get a keyword!

 

[karincam]

The chimney is approximately 3×1.5 meters (at least). What we might cover with gypsum is about 1 meter wide on one side.

 

[karincam]

We had a metal flange made to connect spiral pipes. There are many regulations regarding this. Google imkanal.

Chimney sweeps vary, but I've heard that enclosing a chimney with gypsum is not okay. You can probably find the regulations about this...

Now the chimney sweep has been here. Yes, you can enclose it with gypsum; I asked him. He said I could use whatever I wanted, mortar, gypsum plaster, or drywall. Any of those
Regarding the connection, I could also do as I wanted; either the pipe a bit up into the channel or a flange.
So now it feels easier!

 

[muraren2]

Now the chimney sweep has been here. Yes, you can enclose with plaster; I asked him. He said I could use whatever I wanted, mortar, plaster or plasterboard. Either one
Regarding the connection, I could also do as I pleased; either the pipe a bit up in the channel or a coupling.
So now it feels easier!

Yes, then it's just a matter of going with the option that you think feels easiest

 

[Jannica Pihl]

Gipsputs funkar fint vid fuktiga förhållanden också, putsat mycket badrum med det

Hej! Ser att det är ett väldigt gammalt inlägg.
Putsade en murstock uvanför en vedspis med fiberförstärkt gipsbruk från Ardex.
Nu ca 1,5månad senare, såg jag att det spruckit på ett par ställen.
Kunden ska kakla på. Hur kan jag kolla så det inte släpoer med kaklet. Skyddar kaklet mo r värmen?
Det är en modern vedspis med utblås
uppe i bakkant.

Mvh Jannica Pihl