Nail or screw for cladding

cubix · 2004-07-05T17:15:58+00:00

I am going to nail or screw a cladding panel onto the facade. The wall consists of a vertical stud 45x145, a horizontal stud 45x45, and on top of that, 13mm asfaboard. Now the panel will be installed, consisting of a baseboard 22x70 and a cover board 22x145. Yes, inside the panel there is supposed to be a 10 mm air gap. If using a 3" nail for the baseboard, only 30 mm of the nail goes into the 45x45 stud, and if using a 4" nail for the cover board, only 33 mm penetrates. Is this enough, or should I use 4" and 5" nails respectively, or should I screw the panel in place?

See original (Swedish)

Page 2 of 2

pappskallen

#16

Member

· 2 286 posts

6 Jul 2004 at 5:16 PM

pappskallen

Member

2,286 posts

6 Jul 2004 at 5:16 PM

Outdoor cast.

Nail or screw for cladding

pappskallen

pappskallen

Similar threads

Nail or screw to build modules for a garden shed?

Spika eller skruva bärläkt

Screw or nail panel wall indoors?