Nail gun for MDF on OSB

[kanalvakten]

I was thinking of getting some tips,,, I have an upstairs with a sloped ceiling where OSB is on the studs. I bought a 6 mm MDF panel that I plan to use as a surface layer. Can I nail the MDF board onto the OSB? I was thinking of gluing a bit on the backside as well. My idea was to use 15mm brads (MDF 6mm, OSB 10mm) if this is possible, any tips on a brad nailer? Or am I way off, has anyone done this? Grateful for answers.

 

[FredrikR]

thought I would get some tips,,, I have an upstairs with a sloping ceiling where OSB is attached to the studs. I bought a 6 mm MDF panel that I was thinking of using as a surface layer. Can I nail the MDF board onto the OSB? I was thinking of gluing a bit on the back as well. My idea was to use 15mm nails (MDF 6mm, OSB 10mm) if this is possible, any tips on a nail gun? Or am I way off, has anyone done this? Grateful for answers

Any 16g nail gun should do the job.
You decide how much you want to spend on the gun, whether you want air-driven or battery, etc.