Nail batten for vertical cladding?

[40talshuset]

I will nail out further on a part of the house to improve ventilation behind the panel, but can't find proper furring strips. The studs currently in place are 45x45, so I think I don't want it thicker than 45, and I don't want the strips to build more than necessary, so I think 22x45 would be an excellent size to use as furring strips.

Is it okay to use this as furring strips that I nail onto the existing 45x45s that are already in place as strips?
https://www.byggmax.se/22x45-ytterpanel-p08021045#1225=88493

Byggmax doesn't seem to have any furring strips.. Maybe it's called something different there.

 

[FredrikR]

Planning to add more studs to part of the house to improve ventilation behind the panel, but can't find proper battens. The studs that are currently in place are 45x45, so I think I don't want thicker than 45 and I don't want the battens to add more than necessary, so I think 22x45 would be a perfect size to use as battens.

Does it work to use this as battens that I attach to the existing 45x45r that are already in place as battens?
[link]

Byggmax doesn't seem to have any battens.. Maybe it's called something different there?

28x70, or 28x60 are often used.
Often called "glespanel", available in tongue-and-groove so you can easily splice.