1,898 views ·
13 replies
2k views
13 replies
Keeping Moisture Away with an Ion Generator
I need help with others' experiences and opinions regarding moisture in the basement, which is fully furnished. It smells damp, and I know that about 17 years ago there was a large damp spot on the wall. Everything indoors was done properly, including a moisture barrier, but the problem is that nothing was done externally because there is a large patio directly connected to the wall made of stone and concrete, which meant the drainage was done up to and beyond the patio. The wall with the damp spot was on the side that was not drained. Now it feels like the moisture is back, and my question is, can the problem be resolved with a ion generator? Does it work? Does anyone have experience with it?
Jonatan79 said:
Heat and dehumidifier are present and have been for years, even ventilation has been expanded in recent years without any significant effect.Jonatan79 said:
Kan själv!
· Trelleborg
· 19 654 posts
The functionality and excellence of the wave generator are heavily questioned, assuming we are talking about systems like Arid's. If I recall correctly, it works in principle, but you need an enormously larger current than what these systems use.
Best answer
Kan själv!
· Trelleborg
· 19 654 posts
Same crap different name unfortunately.drami said:
It's been discussed a bit on the forum, search for Arid, Abreen, Dry Power, etc.
Here is a link that summarizes a bit:
https://www.villaagarna.se/radgivni...or-ska-du-undvika-dranering-med-elektroosmos/
Moderator
· Stockholm
· 57 789 posts
One could say it like this: IF it had worked, it would have had a huge breakthrough. But the products that exist in this area should be considered a scam.
Well, the first thing you have to do is start measuring, without measuring you don't know more than what can be seen on the walls. Nowadays there are simple/cheap temperature/humidity sensors for "smart homes."drami said:
I would need help with others' experiences and opinions regarding moisture in the basement which is completely finished. It smells of moisture and I know that about 17 years ago there was a large damp spot on the wall. Indoors, everything was done properly including moisture barriers, but the problem is that nothing was done externally because there is a large patio directly connected to the wall, made of stone and concrete, which resulted in the drainage being done up to and after the patio. The wall with the damp spot was on the side that was not drained. Now it feels like the moisture is back and my question is if the problem can be addressed with an ion generator? Does it work? Does anyone have experience with that?
Then it might be that you have to give up your ambitions with a finished basement and instead have it as a utility space. Based on the measurement, you control the humidity with a dehumidifier.
(that's what I do with my old house)
Another important thing is that the weather has changed with more torrential-like rain.
But if you have a good cash surplus, you can choose to redo the drainage, but it might be pointless with just your house and the conditions for the house.
Click here to reply


