A Adam Lundgren #1 Member · 2 posts 11 Jan 2014 at 7:10 PM Adam Lundgren Member 2 posts 11 Jan 2014 at 7:10 PM #1 Hi! I'm wondering if the wall is load-bearing or not? If it is load-bearing, what does it support? I have marked the 3 studs that are close together with red lines. I have also marked where the studs are located as seen from the upstairs floor plan. https://postimg.org/gallery/3jhaz91lw/ The residence is a townhouse with an attic, in the attic the beams run in the opposite direction as the wall in question. Ground floor, upper floor and attic Year built: 1992 Foundation: Slab on grade Thanks in advance! Adam
Hi! I'm wondering if the wall is load-bearing or not? If it is load-bearing, what does it support? I have marked the 3 studs that are close together with red lines. I have also marked where the studs are located as seen from the upstairs floor plan. https://postimg.org/gallery/3jhaz91lw/ The residence is a townhouse with an attic, in the attic the beams run in the opposite direction as the wall in question. Ground floor, upper floor and attic Year built: 1992 Foundation: Slab on grade Thanks in advance! Adam
Matti_75 #2 Construction veteran · Örebro · 5 184 posts 11 Jan 2014 at 7:31 PM Matti_75 Construction veteran Örebro 5,184 posts 11 Jan 2014 at 7:31 PM #2 Yes, most indications suggest that the wall supports the intermediate floor and may also support the outer roof.
Yes, most indications suggest that the wall supports the intermediate floor and may also support the outer roof.
Mikael_L #3 Member · 56 404 posts 11 Jan 2014 at 7:35 PM Mikael_L Member 56,404 posts 11 Jan 2014 at 7:35 PM #3 Hmm, why do I end up on flashback ... :x