Hi.
Bought a kind of kit, with the insulation unattached. Inside the joints, it became a box. Joint box?
Anyway, I decided to insulate it later, when the roof is on and it's dried out.
I have (as far as I know) 2 options-
1- Remove a few cover boards and insert rigid or fiberglass from the outside, then put the joints on.
2- Drill a few holes from the inside and fill with spray foam
Option 2 is the easiest, but is it a bad idea in some way?
The same applies under the walls on the short sides. There's a kind of box there too, which I didn't insulate before the walls were put in place precisely because I don't want to build in more moisture than necessary. There, it more or less has to be spray foam...
