How to prevent the studs from showing through OSB and drywall?

[Mjärn]

Which plaster have you installed?

Well.. Are there different kinds?

 

[Mjärn]

Studs don't show through OSB and drywall, it's the plastering that's insufficient.

You should take a closer look next time or outsource the work.

I really don't understand what is visible. Can someone explain more clearly?

 

[Violina]

The last piece on the drywall, which is beveled to be filled with filler when placing two drywall sheets next to each other

Edit:


Clearly visible here in the picture from Byggmax's website

 

[Anonymiserad 405730]

Well.. Are there different ones?

Yes, there are. Is it the regular 12.5-13mm drywall with taper joints on the long sides?

 

[fribygg]

I really don't understand what is visible. Can someone explain more clearly?

It's the indentation for the paper tape on the edge of the drywall you see (since you haven't either cut it away or filled it smooth)

 

[Mjärn]

The last piece of the drywall, which is beveled to be able to fill with putty when placing two drywall sheets next to each other

Edit:
[image]

Clearly visible here in the picture from Byggmax website

The one I bought didn't look like that.

 

[Mjärn]

It is the indentation for the paper tape at the edge of the drywall that you see (since you neither cut it off nor plastered it smooth)

I had no paper tape where the bulge is visible

 

[Mjärn]

Yes, there is, is it the regular 12.5-13mm drywall with tapered edges on the long sides?

https://www.jemfix.se/gipsskiva-12-...ZQU36OfxXAKMT41AmFBoCOY0QAvD_BwE&gclsrc=aw.ds

This was the one I bought

 

[Mjärn]

The last piece of the drywall board, which is beveled to be filled with filler when placing two drywall boards next to each other

Edit:
[image]

Clearly visible here in the image from the Byggmax website

But in any case, it can't be what is visible since it's about 95 mm that protrudes out

 

[fribygg]

[link]

This was the one I bought

Does the manufacturer have installation instructions? If so, have you followed them?

 

[Anonymiserad 405730]

You have bought the most common nomalgips board with recessed long sides.. Either you have plastered too thickly or too thinly cannot see it in your pictures..

 

[Anonymiserad 405730]

But regardless, it can't be what's visible since it's about 95 mm that bulges out

Yes, that's how it becomes when two recessed drywall joints are placed against each other; it becomes about 100mm wide, a standard stud is only 45mm wide...

 

[Mjärn]

Does the manufacturer have installation instructions? If so, have you followed them?

I don't know

 

[Mjärn]

You have bought the most common nomalgipsskivan with recessed long sides.. Either you have spackled too thick or too thin, can't see it in your pictures..

I didn't spackle there closest to the closet.

 

[Mjärn]

Yes, that's what happens when two recessed drywall seams are placed against each other, it becomes about 100mm wide, a standard stud is only 45mm wide...

Don't understand