Hello!
Need to build a 7m high gypsum wall. How should it be constructed so that it doesn't become wobbly as heck? Just forget about the usual 45x95 with one layer of gypsum.
Does anyone have any ideas?
Best regards,
Carl
Need to build a 7m high gypsum wall. How should it be constructed so that it doesn't become wobbly as heck? Just forget about the usual 45x95 with one layer of gypsum.
Does anyone have any ideas?
Best regards,
Carl
I would have built with 45x95 but first I would put a transverse "beam" in the middle of the wall made of, for example, 2 glued together 45x220.
Edit: if the wall isn't more than 4-5m wide, of course, then I don't know how I would have done :S
Edit: if the wall isn't more than 4-5m wide, of course, then I don't know how I would have done :S
Last edited:
Use Förstärkningsreglar in steel, available in lengths up to 8m, with double gypsum on both sides.
Or 120 mm steel studs on s45 and two layers of plaster on each side. http://www.norgips.se/projektering/vaggar-stal-db/vaggrupp-2-db/index1,1689.htm